Tekmar 082 Universal Sensor Manual do Utilizador descarregar pdf (Página 1)

D 082

Installation - Universal Sensor 082

STEP ONE

MOUNTING THE SENSOR

NOTE:

These sensors are designed to mount on a pipe or in a temperature immersion well.

The Universal Sensor can be strapped directly to the

pipe using the cable tie provided. Insulation should

be placed around the sensor to reduce the effect of

air currents on the sensor measurement.

The Universal Sensor should be placed downstream

of a pump or after an elbow or similar fitting. This is

especially important if large diameter pipes are used

as the thermal stratification within the pipe can result

in erroneous sensor readings. Proper sensor location

requires that the fluid is thoroughly mixed within the

pipe before it reaches the sensor.

Universal Sensor 082

The tekmar Universal Sensor 082 has a brass sleeve for fast response and a wide operating

range. This sensor can be used in a multitude of applications. The 082 is supplied with

8 ft (2438 mm) of two conductor wire.

1 2 3 4

Página 1

All specifications are subjectto change without notice4 of 4 D 082 - 02/07tekmar Control Systems Ltd., Canadatekmar Control Systems, Inc., U.S.A.Head

Sem comentários

Tekmar 082 Universal Sensor Manual do Utilizador Página 1